Radisson Reflects on a Successful 2025 and Provides 2026 Outlook

Rouyn-Noranda, Quebec, Dec 30, 2025 - (ACN Newswire via SeaPRwire.com) - Radisson Mining Resources Inc. (TSXV: RDS) (OTCQX: RMRDF) ("Radisson" or the "Company") achieved significant progress during 2025 in the exploration and development of its 100%-owned O'Brien Gold Project ("O'Brien" or the "Project") located in the Abitibi region of Québec. The 2026 work program will build upon this success, with the largest ever drill program at O'Brien funded from the Company's largest ever treasury.2025 Milestones957 days of continuous site operations without a lost time incident;Completion of approximately 35,000 metres of drilling with deep step-out holes and directional wedges delineating significant high-grade gold mineralization over a broad area beneath the historic O'Brien gold mine and existing mineral resources (Figure 1);Of the 68 step-out holes and wedges completed, assayed and reported, 56 intersected new gold mineralization with grades and thicknesses consistent with the Project's Mineral Resource Estimate (Table 1), an impressive 82% success rate;A comprehensive metallurgical study demonstrating recoveries of between 86% and 96% based on flow sheet options developed in a milling assessment completed on the nearby Doyon mill under the auspices of a Memorandum of Understanding with IAMGOLD Inc1;A "snap-shot" Preliminary Economic Assessment ("PEA") demonstrating a high-value, low-cost project based on the current mineral resources and use of off-site facilities for processing and tailings management, maximising value and minimising environmental impact;Completion of C$37 million in equity financings to long-term investors. Radisson expects to end 2025 with a treasury (cash and cash equivalents) of approximately C$32 million (unaudited), fully funding of the Company's 2026 work programs.Matt Manson, President and CEO: "Starting in late 2024, we elected to pursue a more aggressive exploration strategy at O'Brien based on the thesis that a significantly larger mineral resource might exist at the Project should its mineralizing system, previously delineated only at shallower levels, continue to depth. Over the last twelve months we have seen consistent success with large step-out drill holes beneath both the existing mineral resources and the historic mine. At the start of this program we drilled OB-24-337, the first ever hole below the final stope of the old mine since mining ended in 1957. This returned 31.24 grams per tonne ("g/t") gold ("Au") over 8.0 metres (including 242.0 g/t Au over 1.0 metre) at 1,500 metres vertical depth. From this single pilot hole, operating continuously for more than 12 months, we have now completed 15 wedges and published results for 11, delineating a system of high-grade mineralization in multiple veins over a broad area. This achievement has delivered outstanding value to the Company and owes much to the skill of the Radisson exploration team and our drill contractor Akakodjici / RJLL, a joint venture between RJLL Drilling of Rouyn-Noranda, Québec and Longpoint First Nation. Overall, the 82% success rate of intersecting mineralization with grades and thicknesses consistent with the Project's mineral resources is a significant achievement for a step-out drill program designed to target open areas with no previous drilling. Currently, an additional 18 drill holes from the 2025 program are "in-progress" of logging, sample preparation or assaying, and awaiting publication."Matt Manson continued: "The PEA released in 2025 demonstrated the attributes of a high value project with a low capex and modest footprint based on the use of existing offsite facilities for processing, of which there are several in the Abitibi region. In 2026, we will continue to refine the Project's development path, with on-going engineering studies, environmental baseline work, community dialog, and engagement with potential processing partners; however, the 2025 PEA was only a "snap-shot" of a project that is continuing to grow. The focus of our work in 2026 and into 2027 will be the ongoing step-out drill program, which has now been expanded to 140,000 metres with eight rigs, fully funded from our strong treasury."Figure 1: Deep step-out drill holes completed and/or published by the Company since December 2024. Drill holes "in-progress" and awaiting final assay results and publication are shown as red traces.To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/10977/279191_c88cea96641e4b8a_001full.jpg2026 Work ProgramThe following 2026 work program has been approved by the Company's Board of Directors:72,500 metres of drilling focussed on new areas of potential gold mineralization. The objective of the program will be step-outs to increase the quantity of mineral resources rather than in-filling to upgrade the classification of an existing mineral resource. With a forecast of 35,000 metres of step-out drilling completed in 2025, a further 32,500 metres will be scheduled for 2027 to complete the 140,000-metre program. All-in drill costs are budgeted at C21 million, or approximately C$290 per metre depending on the average depth of drilling;Up to eight rigs will be deployed with pilot holes and directional wedges. Targets will include the extension of mineralization up to 2 kilometres vertical depth at O'Brien Mine East and beneath resource Trend #s 1 and 2 (see Figure 1). The apparent "gap" area between Trends 1 and 2, attributed primarily to lack of drill density versus lack of mineralization, will be tested, as well as the Thompson-Cadillac area west of the O'Brien mine, which will be drilled for the first time since 2021. Drilling is also planned in the gap area between O'Brien Mine West and East, and below Trends #3 and #4. Program objectives will be reassessed progressively based on results obtained;Progressive updates to the Project's Mineral Resource Estimate as the step-out drill program proceeds;Commencement of assaying by PhotonAssay method with 50-gram fire assay verification replacing Radisson's current two-stage fire assay/screen metallic procedure, designed to better capture whole-rock, coarse gold content and improve assay turnaround time;A program of mine plan optimization and design sensitivity analysis to be undertaken in conjunction with the ongoing drilling and development of the Project's geological and mineral resource models. This work will be conducted by Evomine and will include an assessment of the viability of incorporating existing O'Brien mine infrastructure, such as its 1,000-metre shaft, into a future mine development plan;Ongoing grassroots exploration on Radisson's New Alger property with prospecting and surface geochemistry, and an assessment of the prospectivity of gold mineralization in the Cadillac Sediments located north of the Larder Lake-Cadillac Break and the O'Brien Mine;A comprehensive environmental baseline study focussed on the Project site's biophysical attributes such as water, flora and fauna, to complement existing baseline data on air quality, vibration and noise;Ongoing engagement and dialog focussed on deepening the Company's relationships with communities located within the area of expected economic and social influence of the Project, including the township of Cadillac and the First Nations communities of Pikogan FN (Abitibiwinni) and Long Point FN (Anishinabeg).12-Month Record of Drill Results at the O'Brien Gold ProjectSince the end of 2024, Radisson has published results from 68 drill holes completed as part of the ongoing step-out drill program (Table 1). These are drill holes targeting new areas of mineralization, and as such are distinguished from "in-fill" type drill holes which seek to upgrade areas of known mineralization. Most of these step-out drill holes have intersected gold mineralization in O'Brien's characteristic quartz-sulphide-gold veins within alteration zones, and 56 have intercepts averaging greater than 3 g/t Au (expressed as core length, with minimum sample widths of typically 1.0 to 1.5 metres). Such intercepts are consistent in grade and thickness with the Project's current Mineral Resource Estimate, and Radisson considers them to have the potential to contribute meaningfully to future mineral resources. This is an 82% success rate, which reflects the scope of the O'Brien mineralizing system. At time of writing, an additional 18 drill holes from the 2025 program are "in-progress" of logging, sample preparation or assaying, and awaiting publication.Table 1: Drill Results Published for the O'Brien Gold Project since December 2024Date of PublicationTotal Number of Drill HolesDrill Holes with Intercepts >+3g/tSuccess Rate (%)28th October 2025151387%8th September, 2025151387%16th July 2025141179%2nd April 202533100%26th February 2025201575%16th December 202411100%Total685682% Grant of Equity IncentivesPursuant to the Company's annual short term incentive compensation plan, the Board of Directors has authorized the grant of an aggregate 246,875 Restricted Stock Units to certain officers of the Company vesting on the first anniversary of the date of grant, in accordance with the Company's Omnibus Equity Incentive Plan.QP DisclosureDisclosure of a scientific or technical nature in this news release was prepared under the supervision of Mr. Richard Nieminen, P.Geo, (QC), a geological consultant for Radisson and a Qualified Person for purposes of NI 43-101. Mr. Luke Evans, M.Sc., P.Eng., ing, of SLR Consulting (Canada) Ltd., is the Qualified Person responsible for the preparation of the MRE at O'Brien. Each of Mr. Nieminen and Mr. Evans is independent of Radisson and the O'Brien Gold Project.About Radisson MiningRadisson is a gold exploration company focused on its 100%-owned O'Brien Gold Project, located in the Bousquet-Cadillac mining camp along the world-renowned Larder-Lake-Cadillac Break in Abitibi, Québec. A July 2025 Preliminary Economic Assessment described a low-cost and high-value project with an 11-year mine life and significant upside potential based on the use of existing regional infrastructure. Indicated Mineral Resources are estimated at 0.58 million ounces (2.20 million tonnes at 8.2 g/t Au), with additional Inferred Mineral Resources estimated at 0.93 million ounces (6.67 million tonnes at 4.4 g/t Au). Please see the NI 43-101 "O'Brien Gold Project Technical Report and Preliminary Economic Assessment, Québec, Canada" effective June 27, 2025, and other filings made with Canadian securities regulatory authorities available at www.sedarplus.ca for further details and assumptions relating to the O'Brien Gold Project. For more information on Radisson, visit our website at www.radissonmining.com or contact:Matt MansonPresident and CEO416.618.5885mmanson@radissonmining.comKristina PillonManager, Investor Relations604.908.1695kpillon@radissonmining.comForward-Looking StatementsThis news release contains "forward-looking information" within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates, projections, and interpretations as at the date of this news release. Forward-looking statements including, but are not limited to, statements with respect to the ability to execute the Company's plans relating to the O'Brien Gold Project as set out in the Preliminary Economic Assessment; the Company's ability to complete its planned exploration and development programs; the absence of adverse conditions at the O'Brien Gold Project; the absence of unforeseen operational delays; the absence of material delays in obtaining necessary permits; the price of gold remaining at levels that render the O'Brien Gold Project profitable; the Company's ability to continue raising necessary capital to finance its operations; the ability to realize on the mineral resource and mineral reserve estimates; assumptions regarding present and future business strategies; local and global geopolitical and economic conditions and the environment in which the Company operates and will operate in the future; planned and ongoing drilling; the significance of drill results; the ability to continue drilling; the impact of drilling on the definition of any resource; and the ability to incorporate new drilling in an updated technical report and resource modelling; the Company's ability to grow the O'Brien Gold Project; and the ability to convert inferred mineral resources to indicated mineral resources.Any statement that involves discussions with respect to predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as "expects", or "does not expect", "is expected", "interpreted", "management's view", "anticipates" or "does not anticipate", "plans", "budget", "scheduled", "forecasts", "estimates", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. Except for statements of historical fact relating to the Company, certain information contained herein constitutes forward-looking statements Forward-looking information is based on estimates of management of the Company, at the time it was made, involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the companies to be materially different from any future results, performance or achievements expressed or implied by such forward-looking information. Such factors include, among others; the risk that the O'Brien Gold Project will never reach the production stage (including due to a lack of financing); the Company's capital requirements and access to funding; changes in legislation, regulations and accounting standards to which the Company is subject, including environmental, health and safety standards, and the impact of such legislation, regulations and standards on the Company's activities; price volatility and availability of commodities; instability in the global financial system; the effects of high inflation, such as higher commodity prices; the risk of any future litigation against the Company; changes in project parameters and/or economic assessments as plans continue to be refined; the risk that actual costs may exceed estimated costs; geological, mining and exploration technical problems; failure of plant, equipment or processes to operate as anticipated; accidents, labour disputes and other risks of the mining industry; delays in obtaining governmental approvals or financing; risks relating to the drill results at O'Brien; the significance of drill results; and the ability of drill results to accurately predict mineralization. Although the forward-looking information contained in this news release is based upon what management believes, or believed at the time, to be reasonable assumptions, the parties cannot assure shareholders and prospective purchasers of securities that actual results will be consistent with such forward-looking information, as there may be other factors that cause results not to be as anticipated, estimated or intended, and neither the Company nor any other person assumes responsibility for the accuracy and completeness of any such forward-looking information. The Company believes that this forward-looking information is based on reasonable assumptions, but no assurance can be given that these expectations will prove to be correct and such forward-looking statements included in this press release should not be unduly relied upon. The Company does not undertake, and assumes no obligation, to update or revise any such forward-looking statements or forward-looking information contained herein to reflect new events or circumstances, except as may be required by law. These statements speak only as of the date of this news release.Please refer to the "Risks and Uncertainties Related to Exploration" and the "Risks Related to Financing and Development" sections of the Company's Management's Discussion and Analysis dated April 29, 2025 for the year ended December 31, 2024, and the Company's Management's Discussion and Analysis dated November 26, 2025 for the three month period ended September 30, 2025, all of which are available electronically on SEDAR+ at www.sedarplus.ca. All forward-looking statements contained in this press release are expressly qualified by this cautionary statement.Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.1 The Memorandum of Understanding is non-binding and non-exclusive and contains no specific terms around potential commercial arrangements between the parties. The O'Brien PEA has been completed independently by Radisson and establishes criteria for the development of O'Brien based on processing and tailings management at an off-site facility under a toll milling arrangement.Source: Radisson Mining Resources Copyright 2025 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

吉因加啟動港股IPO:AI驅動全鏈條精準醫療 構築差異化技術壁壘

香港, 2025年12月30日 - (亞太商訊 via SeaPRwire.com) - 在全球科技革命與醫療健康需求加速升級的雙重驅動下,精準醫療正成為各國競相布局的戰略性創新高地。近日,中國領先的精準醫療企業 —— 吉因加科技(紹興)股份有限公司(下稱「吉因加」或「公司」)正式向港交所主板提交上市申請,擬赴港 IPO,標誌著公司邁向資本化發展新階段,也將進一步推動中國精準醫療產業高質量發展。深耕精準醫療領域多年,吉因加以 AI 與臨床價值洞見深度融合為核心,逐步構建清晰而穩固的差異化競爭優勢。作為中國少數將 AI 能力深度嵌入生物標誌物全價值鏈核心環節的企業,吉因加依托自主研發的多組學技術平台,已成功打造出業內唯一覆蓋從多組學生物標誌物及靶點發現、驗證、產品開發至商業化落地的完整鏈條。三大核心業務協同並進,構建全鏈條服務體系吉因加圍繞精準醫療核心需求,形成業務架構清晰的三大核心業務板塊 —— 精準診斷、藥物研發賦能及臨床科研與轉化,構建價值共創、協同增收的業務閉環。其中,精準診斷解決方案以新一代定序(NGS)技術及多組學分析的創新臨床應用為核心,聚焦腫瘤、感染性疾病、器官健康等關鍵疾病領域,為醫療機構提供端到端解決方案。根據灼識諮詢數據,公司推出的「吉因加吉智 ® 號」,是業內首個自動化診斷平台,也是中國首個集成了 AI、大數據和物聯網技術的智能分子診斷系統,實現從樣本進樣至報告生成全流程「無人值守」,已在國內多家頂尖醫院部署,顯著提升了檢測通量並縮短了交付時間(TAT),為中國分子診斷領域樹立了新的行業標桿。同時,該解決方案配套了覆蓋高價值臨床需求的全維度產品組合。例如,在腫瘤領域,吉因加推出了包括用於精準治療指導的伴隨診斷(CDx)檢測組合、用於復發風險評估的 MRD 監測工具,以及基於公司自主研發的 GM-seq 甲基化技術的 MCED 產品。根據灼識諮詢資料,公司的 MRD 檢測產品是中國首個進入國家藥監局創新醫療器械特別審查程序的同類產品,確立了公司在 MRD 商業化領域的顯著先發優勢。此外,其 MCED 檢測產品在性能方面已達到國際領先水平,具備廣闊的臨床應用前景與市場推廣潛力。於藥物研發賦能板塊,吉因加主要為全球製藥企業提供覆蓋藥物開發全生命週期的服務,包括生物標誌物與靶點的發現與驗證、患者入排檢測、CDx 聯合開發,以及基於計算機模擬的虛擬臨床試驗等,服務範圍覆蓋小分子藥物、單克隆抗體和細胞與基因治療等多元療法開發領域。依托自研大模型及高質量臨床資料庫,公司能夠高效識別與疾病進展、治療反應相關的分子靶點,顯著提升新藥研發效率。臨床科研與轉化板塊則構成吉因加技術創新的「孵化器」。透過 AI4S 科研服務平台,吉因加為科研機構與臨床研究中心提供從多組學數據獲取處理、AI 驅動分析建模,再到臨床轉化的全鏈條支持,重點聚焦腫瘤、心腦血管及神經系統等複雜疾病領域,加速科研成果向臨床應用轉化,助力核心技術迭代與新產品研發。三大核心業務協同發力,使吉因加構築起以 AI 多組學為核心的精準醫療生態系統,透過臨床診斷持續沉澱高質量數據資產,推動算法迭代提升診療能力;通過科研合作拓寬臨床認知邊界,形成持續演進的自學習系統,進而驅動全產業鏈條價值複合增長,不斷鞏固其在 AI 賦能精準醫療領域的領先地位。商業化落地顯著盈利能力持續改善,長期成長空間值得市場期待得益於三大業務板塊的協同發展,吉因加近年來商業化落地成果顯著。目前,公司已累計服務全國 1,000 餘家醫院,當中包括 30 家中國百強醫院,並與 200 餘家製藥企業及 500 餘家臨床研究機構建立穩定合作關係。廣泛且深入的合作關係,不僅驗證了公司技術與產品的臨床價值和商業可行性,更構建了強大的行業資源壁壘,為公司的營收增長與長期穩健發展奠定了堅實基礎。根據灼識諮詢數據,以 2024 年營業收入計,吉因加在中國精準診斷解決方案市場排名第三,穩居行業頭部陣營。從財務表現觀看,吉因加近年業績呈現階段性波動特徵,具體來看,2022 年、2023 年、2024 年及 2025 年上半年,公司營業收入分別為 18.15 億元、4.73 億元、5.57 億元及 2.85 億元;同期,公司期內淨利潤分別為 3.72 億元、5,412.70 萬元、-4.24 億元及 - 4.14 億元。需要指出的是,2022 年公司收入包含特殊時期的一次性業務貢獻;剔除該因素後,其收入結構已穩步回歸至三大核心業務板塊,並自 2023 年起保持持續增長態勢,且主營業務盈利能力持續改善。而財務報表中出現的大额虧損,主要系投資人公允價值變動等非經營性損益所致,並非主營業務的經營性盈虧,不影響公司核心業務的基本面與健康發展態勢。從資本市場維度來看,精準醫療作為生物科技與臨床醫學深度融合的黃金賽道,正受益於技術迭代加速、臨床需求剛性釋放及政策紅利持續加碼等多重因素,已成為一、二級市場關注的焦點領域之一。吉因加憑藉 AI 賦能的全鏈條技術布局、三大協同互補的業務板塊及深厚的行業資源積累,已成為中國精準醫療行業的領先企業。隨著赴港 IPO 進程的推進,公司有望借助資本市場的力量,加速研發投入與全球化拓展,推動其從「技術領先者」向「商業領跑者」躍遷,其長期成長空間與投資價值,值得市場持續關注。​ Copyright 2025 亞太商訊 via SeaPRwire.com. All rights reserved. www.acnnewswire.com

CBL International Facilitates Xiaomo Port’s First LNG Bunkering for BYD in Shenzhen

KUALA LUMPUR, December 30, 2025 - (ACN Newswire via SeaPRwire.com) – December 30, 2025, CBL International Limited (NASDAQ: BANL), the listed entity of Banle Group, today announced that it has completed Xiaomo Port’s first-ever LNG bunkering operation, serving BYD in Shenzhen through a physical supplier, supporting BYD’s maritime decarbonization. The service was facilitated in collaboration with China National Offshore Oil Corporation (“CNOOC”), which supported this inaugural bunkering at the port.This milestone strategically diversifies CBL’s revenue streams and expands its sustainable fuel offerings beyond its existing biofuels portfolio. Against the backdrop of the global shipping industry accelerating decarbonization, LNG serves as a mainstream marine clean energy source, capable of significantly reducing greenhouse gas emissions by approximately 20% - with near-zero emissions of sulfur oxides and particulate matter- and lowering fuel costs by approximately 25%-30%. This initiative supports the maritime industry's transition toward cleaner energy solutions in line with regulations such as FuelEU Maritime and IMO 2030/2050 targets.“This is a strategic step in our journey to become a comprehensive marine energy services partner,” said Dr. Teck Lim Chia, Chairman and CEO of CBL International. “We are grateful to BYD and CNOOC for their trust and collaboration.”CBL International is a trusted bunkering services facilitator, serving nine of the world’s top twelve container liner companies. The company's expertise in coordinating complex fuel logistics transactions underscores its value proposition as a specialized service partner in the evolving maritime energy landscape.Photo Caption: CBL International Facilitates Xiaomo Port's First LNG Bunkering for BYD in Shenzhen.About the Banle GroupCBL International Limited (Nasdaq: BANL) is the listing vehicle of Banle Group, a reputable marine fuel logistics company based in the Asia Pacific region that was established in 2015. We are committed to providing customers with a one-stop solution for vessel refueling, which is referred to as bunkering facilitator in the bunkering industry. We facilitate vessel refueling mainly through local physical suppliers in 65 major ports covering Belgium, China, Hong Kong, India, Japan, Korea, Malaysia, Mauritius, Panama, the Philippines, Singapore, Taiwan, Thailand, Turkey and Vietnam. The Group actively promotes the use of sustainable fuels and has been awarded the ISCC EU and ISCC Plus certifications, as well as EcoVadis Silver Medal.For more information about our Company, please visit our website at: https://www.banle-intl.com. Copyright 2025 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

CBL International完成深圳小漠港首次LNG加注 助力比亞迪海運脫碳

吉隆坡, 2025年12月30日 - (亞太商訊 via SeaPRwire.com) - 2025年12月30日,CBL International Limited(納斯達克代碼:BANL)(「公司」或「CBL」),萬利集團(「萬利」或「集團」)的上市主體,今日宣布已通過實體供應商,在深圳小漠港完成了該港口的首次液化天然氣(LNG)加注,助力比亞迪海運脫碳。此次加注得益於與中國海洋石油集團有限公司(「中國海油」)的緊密合作,中國海油為該港口的此次首航加注作業提供了支持。這一里程碑事件具有重要的戰略意義,它不僅拓寬了CBL的收入來源,還將其可持續燃料供應範圍從現有的生物燃料產品組合擴展至LNG領域。在全球航運業加速脫碳的背景下,LNG作為主流的船用清潔能源,可顯著降低約20%的溫室氣體排放,並實現硫氧化物和顆粒物近乎零排放,同時節約燃料成本約25%-30%。此舉旨在支持海運業向更清潔的能源解決方案轉型,以順應《歐盟海運燃料法規》(FuelEU Maritime)及國際海事組織(IMO)2030/2050目標等法規要求。「這是我們邁向成為綜合性船用能源服務合作夥伴之旅的戰略一步,」 CBL International 董事長兼首席執行官謝威廉博士表示: 「感謝比亞迪和中國海油的信任與合作。」CBL International 是全球值得信賴的船舶燃料加注服務商,為全球前十二大集裝箱班輪公司中的九家提供服務。公司在協調複雜燃料物流交易方面的專業能力,凸顯了其在不斷演變的船用能源領域作為專業服務合作夥伴的價值主張。圖片說明:CBL International在深圳小漠港為比亞迪完成該港口首次LNG加注作業。關於萬利集團萬利集團成立於 2015 年,以CBL International Limited(納斯達克:BANL)在納斯達克股票市場上市。我們致力於為客戶提供一站式燃油供應服務,被業內稱為燃油供應服務商。我們主要通過當地實體供貨商為船舶提供燃油加注服務,遍布比利時、中國、香港、印度、日本、韓國、馬來西亞、毛里裘斯、巴拿馬、菲律賓、新加坡、台灣、泰國、土耳其和越南,共覆蓋65個港口。集團積極推動可持續燃料,並已取得ISCC EU和ISCC Plus認證,以及EcoVadis銀牌評級。如欲瞭解更多信息,請到集團網站 https://www.banle-intl.com  瀏覽。 Copyright 2025 亞太商訊 via SeaPRwire.com. All rights reserved. www.acnnewswire.com

聯康集團攜手溫醫大國家工程研究中心及甌海區政府共建生長因數創新生態,加速再生醫學戰略佈局

EQS via SeaPRwire.com / 2025-12-30 / 17:36 UTC+8 【香港,2025年12月30日】 聯康生物科技集團(以下簡稱“聯康集團”或“本集團”)欣然宣佈,近日在浙江省溫州市,本集團與溫州醫科大學細胞生長因數藥物和蛋白製劑國家工程研究中心(以下簡稱“溫醫大國家工程研究中心”)、溫州市甌海區人民政府正式簽署三方戰略合作協定,並就後續共建“聯康-溫醫大轉化醫學聯合創新實驗室”事宜進行探討。此次合作是聯康集團深度融入國家級科研平臺與區域產業生態的關鍵一步,通過“政—校—企”協同機制,三方將圍繞生長因數這一再生醫學核心賽道,構建從基礎研究、臨床轉化到產業化落地的全鏈條創新體系,對本集團夯實研發管線、加速戰略落地具有里程碑意義。 (圖:戰略簽約儀式合影) 聚焦生長因數前沿,釋放“1+1>2”臨床市場潛力 生長因數作為調控細胞增殖、遷移與組織修復的關鍵信號分子,是再生醫學領域最具轉化價值的生物活性物質之一。目前,EGF(表皮生長因數)與FGF(成纖維細胞生長因數)已在創傷修復、眼科疾病、代謝紊亂等多個適應症中展現出顯著療效,市場空間廣闊。 聯康集團在EGF領域擁有深厚積累,旗下金因肽®與金因舒®已實現規模化生產與全國商業化覆蓋。而溫醫大國家工程研究中心在李校堃院士帶領下,長期引領全球FGF藥物研發,成功轉化了包括重組人鹼性成纖維細胞生長因數在內的多個國家一類新藥,並在創傷、代謝性疾病等領域積累了深厚的臨床資料與權威專家共識。 基於此,三方將率先在燒傷科、皮膚科、眼科等重點領域開展EGF與FGF的聯合治療研究,探索多因數協同作用機制,開發更具療效優勢的複方製劑與給藥方案,共同定義生長因數治療的新標準,引領百億級細分市場的未來發展方向。   院士領銜+平臺賦能,打造“研-產”直連快車道 溫醫大國家工程研究中心是由溫州醫科大學依託國家級科研平臺“細胞生長因數藥物和蛋白製劑國家工程研究中心”舉辦的獨立事業法人單位,承擔工程技術研發、科技成果轉發及技術服務的下游職能,與主攻上游基礎研究的“大分子藥物與規模化製備全國重點實驗室”協同發展,佈局了涵蓋代謝、皮膚等多系統的下一代生長因數藥物研發管線。在李校堃院士團隊的持續攻關下,中心已在長效化修飾、靶向遞送等核心技術上取得重要突破,並領先探索霧化吸入等創新給藥技術。 未來擬共建的“聯康-溫醫大轉化醫學聯合創新實驗室”,將深入探索表皮生長因數(EGF)與成纖維細胞生長因數(FGF)在調控代謝穩態、改善胰島素敏感性及促進組織修復等方面的協同作用機制,開發新型複方製劑及給藥系統,例如以非酒精性脂肪性肝炎(NASH)為代表的內分泌疾病、以哮喘為代表的呼吸系統疾病、及骨組織修復等。這些疾病的全球患者基數龐大,但臨床上對創新療法存在顯著未滿足需求。通過此次合作,將有望填補多個細分適應症的治療空白,進一步釋放在廣闊慢病市場的臨床與商業價值。   “政-校-企”三位一體,系統性強化全鏈條能力 本次合作不僅是技術協同,更是生態共建。甌海區人民政府作為重要的推動者與支持方,打造的核心產業平臺“中國基因藥穀”,為合作項目提供從研發、中試到產業化的全方位空間支撐與專項政策支持。 對聯康而言,此次三方合作帶來三重賦能: 研發端:直接接入國家級工程研究中心的源頭創新與核心技術,提升研發起點; 臨床端:聯動溫州醫科大學附屬醫院體系,加速產品臨床驗證與適應症拓展; 商業化端:借助中國基因藥谷的先進製造能力與區域政策紅利,保障高效落地建設並推動藥品進院使用。   此次戰略合作,是本集團錨定"成為再生醫學領域的全球領導者,重新定義科學如何修復和延長人類生命"願景的重要落子。未來,本集團將持續深化與國家級科研機構、地方政府的合作,推動更多前沿科研成果向臨床價值與市場價值轉化,鞏固並提升其在再生醫學領域的綜合競爭力與行業引領地位。   End   關於聯康集團 聯康生物科技集團有限公司是一家於2001年在香港聯合交易所主機板上市的創新型生物醫藥企業(股票代碼:00690.HK),致力於以下一代合成生物學技術與複雜多肽創新,驅動再生醫療發展。本集團聚焦於骨骼/肌肉再生、皮膚再生、眼部再生及耳鼻喉(ENT)再生四大核心研究領域,構建了涵蓋生物創新藥、高值仿製藥與醫療美容等板塊的多元化產品管線。本集團分別於北京、東莞及深圳均設有GMP的生產基地,具備研發、生產及商業化銷售的全鏈條能力。本集團致力於成為再生醫學領域的全球領導者,重新定義科學如何修復與延展人類生命。 關於溫州醫科大學細胞生長因數藥物和蛋白製劑國家工程研究中心 溫醫大國家工程研究中心是由溫州醫科大學依託國家級科研平臺“細胞生長因數藥物和蛋白製劑國家工程研究中心”舉辦的獨立事業法人單位,承擔工程技術研發、科技成果轉化及技術服務的下游職能。在中國工程院李校堃院士的帶領下,長期深耕於細胞生長因數藥物領域的基礎研究與新藥創制,處於全球引領地位。該中心彙聚了頂尖科研團隊,承擔了多項國家重大科技專案,成功研發了系列具有自主智慧財產權的FGF類創新藥物,與主攻上游基礎研究的“大分子藥物與規模化製備全國重點實驗室”協同發展,形成了從源頭創新、關鍵技術突破到產業轉化的完整創新鏈。中心是“中國基因藥穀”的重要研發引擎,正持續推動包括長效FGF21在內等多個創新藥品種的孵化與轉化。 關於溫州市甌海區人民政府 溫州市甌海區人民政府是本次戰略合作的重要支持方,致力於打造一流的生物醫藥產業生態。其核心平臺“中國基因藥穀” 為合作項目提供了從研發、中試到產業化的全方位空間與政策支持。甌海區通過制定專項產業政策、提供“全程陪跑”服務、協調臨床資源對接等方式,全力賦能創新項目落地與成長,是區域生物醫藥產業創新發展的重要推動者。 2025-12-30 此財經新聞稿由EQS via SeaPRwire.com轉載。本公告內容由發行人全權負責。瀏覽原文: http://www.todayir.com/tc/index.php

重磅敲鑼!臥安機器人(6600.HK)加冕AI具身家庭機器人第一股 引領行業新發展

香港, 2025年12月30日 - (亞太商訊 via SeaPRwire.com) - AI浪潮席捲全球,疊加老齡化與消費升級的長期趨勢,家庭機器人行業在具身智慧技術日新月異的發展下正加速邁向全場景智慧服務新階段。技術突破、需求爆發與多元競爭格局,共同催生出一條黃金賽道。  立于時代潮頭,臥安機器人今日正式于香港聯交所上市,加冕"國內AI具身家庭機器人第一股"。臥安機器人本次IPO共計發行22,222,300股 H 股,其中香港公開發售獲254.5倍認購,國際發售獲8.9倍認購。尤為矚目的是,公司成功引入包括高瓴、Cithara、無極資本、中國東方等在內的九家頂尖機構作為基石投資者,合共認購超7億港元,基石陣容強大。從招股熱烈反響到上市鐘聲敲響,背後是資本市場對臥安機器人所處賽道價值與公司自身競爭力的雙重認可。技術產品雙硬核:全場景矩陣+核心專利構建競爭優勢臥安機器人作為全球稀缺的具身機器人領軍企業,聚焦運動機器人、陪伴機器人、人形機器人三大黃金賽道,以差異化定位開闢行業新藍海。而且不同於多數企業紮堆To B領域探索商業化,臥安機器人憑藉前瞻性佈局與深厚技術積澱,已實現核心賽道的規模化落地與驗證。產品方面,臥安機器人已經打造了覆蓋增強型執行機器人、感知與決策系統的全品類產品矩陣,深度適配智慧操控、家務勞動、養老護理、運動陪伴等多元家庭場景。臥安機器人自主研發的AI網球機器人Acemate作為全球首款能夠真人對打的網球機器人,與宇樹科技雙足機器人Unitree R1、Figure AI家務機器人Figure 03一同上榜美國《時代》雜誌"2025年度最佳發明"榜單。臥安機器人在柏林IFA展會上發佈的全球首款本地部署大模型的AI陪伴機器人Kata Friends,一舉斬獲Best in IFA Next和Best in Emerging Tech兩項創新大獎,證明了其在情感交互技術上的領先性。值得一提的是,作為中國的Figure,臥安機器人計畫於2026年1月推出首款人形家庭機器人H1,重點覆蓋衣物分類整理、餐後餐具清洗收納、輔助備餐等高頻生活場景,這款新品是臥安機器人十年來沉澱的具身智慧技術的集大成之作,以硬核科技全力兌現家庭勞動力解放的終極願景。技術則是臥安機器人構建核心競爭力的基石。公司自主掌握機器人定位與環境構建、AI機器視覺控制、分佈式神經控制網路三大核心技術棧,通過各技術模組協同作用,實現毫米級精准定位、毫秒級物體識別及自主學習決策能力,讓機器人能精准匹配家庭多樣化服務需求。從AI網球機器人、AI陪伴機器人到人形家務機器人,公司構建的以智能家庭機器人產品為核心的生態系統正在不斷完善。從技術到市場,從產品到生態,臥安機器人以"技術創新+場景深耕"雙輪驅動,持續強化在具身機器人領域的先發優勢,已經成長為家庭智能生態賽道中極具成長潛力的領軍者,構建起難以複製的競爭壁壘。需要指出的是,取得這些成績的背後離不開持續的研發投入與人才儲備。截至2025年12月11日,臥安機器人研發人員達278人,占員工總數的43.4%,形成了一支專業過硬的研發團隊;2022年至2024年,研發開支複合年增長率達34.7%,由此累計擁有311項專利(含56項發明專利),覆蓋核心技術、產品設計等關鍵領域,形成堅實的知識產權保護體系,為產品迭代升級提供不竭動力。全球化佈局成效顯著:千萬用戶生態+穩健業績增長在強大的技術實力之外,覆蓋全球多國的全渠道銷售及分銷網絡亦是臥安機器人的核心競爭力之一。根據資料,臥安機器人以"SwitchBot"、"Acemate"品牌直面全球消費者,產品銷往全球逾90個國家和地區,主要為日本、歐洲及北美,於世界各地逾2000家線下零售店可供購買,線上則與亞馬遜(AMZN.US)等國際知名零售商建立穩定合作,此外公司亦佈局有自營網站的DTC渠道。用戶數據層面,截至2025年12月11日,臥安機器人的SwitchBot App全球累計註冊用戶超356萬名,連接設備總數突破1080萬台,其中55.9%的註冊用戶已連接兩款及以上產品,充分體現了產品生態的高粘性,形成"產品優化-用戶認可-數據反饋-再優化"的良性循環。領先的技術、優異的產品力以及扎實的市場佈局在業績層面亦得到了印證。資料顯示,2022至2024年,臥安機器人的收入從2.75億元增長至6.10億元,複合年增長率達49.0%;2025年上半年收入3.96億元,同比增長44.10%,增長勢頭持續強勁。盈利也在能力持續改善,2022年至2024年及2025年上半年的毛利率分別為34.3%、50.4%、51.7%、54.2%,主要系已確立核心優勢的家庭系統產品類別的銷售額持續增長、產品組合持續優化及高利潤率新產品成功上市。與此同時,臥安機器人2025年上半年的淨利潤實現扭虧為盈,增至2790.3萬元,經調整EBITDA則在2023年就已實現盈利,業務可持續性與盈利品質得到充分驗證。結語當前,全球機器人行業正迎來加速增長的黃金期,市場滲透率持續攀升,整體規模不斷擴容。根據弗若斯特沙利文的資料,2022年至2024年全球家用機器人市場規模從2133億元(人民幣,下同)增長至2577億元,複合年增長率9.9%,預計到2029年市場規模將增至4365億元,2024年至2029年的複合年增長率為11.1%。與此同時,行業內優必選(9880.HK)、越疆(2432.HK)、極智嘉-W(2590.HK)、雲跡(2670.HK)等企業已經登陸港股市場,宇樹科技、智元等同行亦在加速前行。海外方面,1X Technologies、Figure等同樣獲得大額融資,接入大模型。從同業企業披露的訂單以及收入趨勢亦可以看出,機器人行業正駛入發展快車道。在此行業浪潮下,臥安機器人以"AI具身家庭機器人第一股"的鮮明定位成功登陸港股,完成關鍵資本佈局。借助本次全球發售募集的資金,公司將進一步夯實技術壁壘、豐富產品矩陣、拓展全球渠道,持續鞏固自身的核心競爭優勢。根據發售公告,臥安機器人此次的募資用途明確:66.5%將用於提升研發能力,聚焦AI具身家庭機器人系統相關關鍵技術研發與產品開發,核心是機器人定位技術、AI機器視覺控制技術及邊緣計算技術、基於VLA模型的人形家務機器人技術等,以及建設高標準的機器人數據採集工廠,專門用於迭代和優化人形機器人的VLA模型;19.8%將用於拓展銷售渠道、擴大地區覆蓋範圍及提升品牌全球知名度。展望未來,臥安機器人有望以此次上市為契機,依託智能家庭市場紅利,持續深化技術創新、加速新品落地進程、拓展全球市場版圖,賦能億萬家庭美好生活,在AI具身家庭機器人行業的發展浪潮中穩步前行。 Copyright 2025 亞太商訊 via SeaPRwire.com. All rights reserved. www.acnnewswire.com

國泰君安國際獨家保薦迅策科技 助力大模型Data Agent第一股登陸港交所主板

香港, 2025年12月30日 - (亞太商訊 via SeaPRwire.com) - 國泰海通集團下屬公司國泰君安國際控股有限公司(「國泰君安國際」或「公司」,股份代號:1788.HK)作為獨家保薦人、保薦人兼整體協調人、聯席全球協調人、聯席賬薄管理人及聯席牽頭經辦人,成功助力深圳迅策科技股份有限公司(「迅策」,股份代號:3317.HK)于香港聯合交易所主板正式掛牌上市。迅策此次上市,標誌著港股市場迎來了以实時數據基礎設施及分析為核心業務的「大模型Data Agent第一股」,不僅為迅策開啟了國際資本市場的全新篇章,也彰顯了國泰海通集團精准發掘並賦能新一代信息技術領軍企業的卓越能力。(國泰君安國際投行團隊出席上市儀式)本次發行最終定價為每股48港元,公司全球發售共2,250萬股H股,基礎發行募集資金規模約10.8億港元,超額配售權完全行使後預計總集資額將達約11.3億港元。國際配售和香港公開發售錄得踴躍認購,國際配售認購倍數達約3.1倍,香港公開發售認購倍數達約7.2倍。在市場波動中,本次發行獲得了國際及本地投資者的熱烈追捧,充分反映了全球頂尖資本對中國數據智能賽道高成長性企業長期價值的堅定信心。項目執行過程中,國泰君安國際憑藉對數據科技產業的深刻洞察和高效的跨市場執行能力,協助迅策科技在3個月內順利完成從遞交H股上市申請到成功在港交所掛牌的全流程。項目團隊深度挖掘公司作為「大模型Data Agent第一股」的獨特投資敘事,聚焦其雲原生統一实時數據平台的技術壁壘及從金融垂直領域向多行業成功複製的平台化擴張潛力,開展了系統、精准的市場推介。此次發行成功引入了包括中視金橋(00623.HK)、Alphahill基金、富策控股、Infini基金、薔薇香港、雲鋒基金、Cithara基金、Factorial及Joy Mobile在內的九家高品質基石投資者。基石投資者合共認購約3,957萬美元(約3.078億港元)股份,約占本次發售股份的28.5%。此次基石陣容多元,涵蓋了中資產業資本及知名外資基金,不僅體現了不同類型投資者對公司商業模式的一致看好,也為上市後股價的穩定提供了有力支撐。迅策的成功上市,是國泰海通服務科技創新的又一典範之作。該項目的完成,不僅助力一家具有稀缺技術平台價值的中國企業對接國際資本市場,也向全球投資者展現了中國在數據智能與AI應用領域的創新活力。關於深圳迅策科技股份有限公司迅策是中國領先的实時數據基礎設施及分析解決方案供應商。公司成立於2016年,總部位於深圳,並在北京、上海、杭州及香港設有分支機搆。公司以自主研發的雲原生統一數據平台為核心,為全行業企業提供從數據獲取、清洗、管理到分析與治理的全鏈路实時信息技術解決方案,其系統可部署于客戶自主管理的雲端或本地環境。公司從對數據实時性、準確性要求最為嚴苛的資產管理領域切入並建立領先優勢,服務超過百家總部級核心金融機構。在此基礎上,公司成功將其模組化、可拼裝的解決方案橫向複製到電信、城市管理、金融服務等多個行業,實現了從「金融專家」到「跨業能手」的戰略轉型。截至2025年上半年,來自資產管理以外的多元化行業收入占比已超過50%,展現了強大的跨行業擴張能力和增長潛力。關于國泰君安國際國泰海通集團下屬公司國泰君安國際(股票代號:1788.HK),是中國證券公司國際化的先行者和引領者,公司是首家通過IPO于香港聯合交易所主板上市的中資證券公司。國泰君安國際以香港爲業務基地,幷在新加坡、越南和澳門設立子公司,業務覆蓋全球主要市場,爲客戶境外資産配置提供高品質、多元化的綜合性金融服務,核心業務包括財富管理、機構投資者服務、企業融資服務、投資管理等。目前,國泰君安國際已分別獲得穆迪和標準普爾授予「Baa2」及「BBB+」長期發行人評級,MSCI ESG「A」評級, Wind ESG「A」評級及商道融綠ESG「A」評級,同時其標普全球ESG評分領先全球84%同業。公司控股股東國泰海通證券(股票代號:601211.SH/2611.HK)爲中國資本市場長期、持續、全面領先的綜合金融服務商。更多關于國泰君安國際的資訊請見:https://www.gtjai.com Copyright 2025 亞太商訊 via SeaPRwire.com. All rights reserved. www.acnnewswire.com

環球新材國際(06616.HK)斬獲ESG雙項殊榮,投資價值與領袖影響力獲雙重認可

EQS via SeaPRwire.com / 2025-12-30 / 16:10 UTC+8        2025年12月30日,由全球商報聯盟、香港商報、香港經濟導報聯合主辦的2025年度上市公司卓越ESG價值榜頒獎盛典在港舉行。來自香港特區政府、行業協會、上市公司、投資機構等上百位與會嘉賓出席。香港商報董事總經理戴傑、香港特區政府財經事務及庫務局副局長陳浩濂等多位領導參會並致辭。   會上公佈了2025年度上市公司卓越ESG價值榜獲獎公司及企業家名單。環球新材國際(06616.HK)憑藉其在環境、社會及管治領域的卓越實踐與長期價值創造能力,在一眾參選公司中脫穎而出,最終斬獲「ESG卓越投資價值上市公司」獎項;主席兼行政總裁蘇爾田博士則以其高瞻遠矚的可持續發展領導力,獲評「ESG卓越影響力商界領袖」。         榮膺卓越ESG價值榜雙項殊榮,樹立新材料行業可持續發展新標杆 2025年度上市公司卓越ESG價值榜系列活動將「以責任為錨,赴價值藍海」作為主題,聚焦企業在環境、社會與治理領域的卓越實踐,遴選把負責任的發展理念內化為戰略「壓艙石」和行動「定盤星」的傑出企業與人物,助力企業以卓越ESG實踐構建長期競爭優勢,穿越週期波動,駛向更廣闊、更可持續的價值新藍海。 年度上市公司卓越ESG價值榜以「戰略治理力、環境友好度、社會責任感、價值共創性、創新引領力、可持續發展」六大維度為核心評判體系,在組委會和主辦機構推薦的基礎上,綜合入圍公司及專業諮詢機構提供的客觀指標和主觀指標兩大數據指標計分。結合嚴謹的數據分析、企業調研與科學的評價指標,全面評估企業在ESG戰略融合、綠色技術應用、減排目標落實、社會包容推動以及治理透明度等方面的綜合表現。 經過報名初審、數據採集調研、專家顧問團評審和組委會定榜等環節,最終產生2025年度上市公司卓越ESG價值榜企業獲獎名單。環球新材國際(06616.HK)榮膺這兩項重量級獎項,不僅是對環球新材國際將ESG基因深度融入戰略運營核心的高度讚譽,更標誌著資本市場對其全面踐行ESG綠色發展理念的認可,及其所蘊含的長期投資價值的堅定信心。   以ESG為引擎,驅動可持續增長新範式 作為一家全球化新材料科技平台企業,環球新材國際主營業務涵蓋珠光顏料、人工合成雲母、高端片狀氧化鋁、高端工業功能性材料及表面活性材料等,產品廣泛應用於汽車製造、塗料、化妝品、新能源、電子電器等領域,在珠光顏料、人工合成雲母、表面活性材料等多個細分領域處於全球領先地位。 在全球可持續發展的大背景下,綠色製造已成為企業發展的必然選擇。環球新材國際始終堅守「綠色製造、生態立企」的環保理念,將高質量綠色可持續發展理念深度融入公司發展戰略,積極踐行節能減排、循環利用、綠色發展的理念。公司從源頭節約能源,從生產過程控制浪費,從末端減少污染,努力實現原料無害化、生產潔淨化、廢物資源化、能源低碳化。 公司在產品與工藝的環境友好性、社會責任履行,直接影響著下游產業的綠色轉型與終端消費者的健康安全。多年來,公司構建了由董事會直接監督的ESG管治架構,將ESG目標與研發創新、生產運營、供應鏈管理及客戶服務全面融合,確保可持續發展理念貫穿於價值創造的每一個環節。 環球新材國際作為國家工信部「工業強基工程」戰略新興材料-人工合成雲母項目承擔單位,掌握了全球領先的合成雲母和珠光材料關鍵核心技術,截至2025年6月30日,集團共擁有156項核心專利,超過2000多種標準產品出口全球150多個國家和地區。集團旗下的廣西七色珠光材料股份有限公司榮獲國家工業和信息化部評定的「國家級綠色工廠」稱號以及「國家知識產權優勢企業」;集團旗下的韓國CQV公司亦憑藉其在可持續發展和企業社會責任方面的卓越表現,多年持續榮獲EcoVadis金級評級(Gold Medal),為行業樹立了標杆。 隨著高端產能上下游佈局的加速推進,多個重大項目順利落地,公司七色珠光二期珠光材料工廠已逐步投產,這個採用了全球先進工藝與最高環保標準建設的綠色生產基地,擁有先進的生產管理平台數據中心,實現了集約化、流程化、規範化、智能化管理。另外,集團在杭州桐廬的合成雲母項目已進入設備安裝階段。   通過核心技術升級,引領新材料產業的綠色革命 在全球碳中和目標及消費者環保意識覺醒的大背景下,綠色、安全、可追溯的原材料已成為下游製造業的剛性需求。特別是「低碳、環保」已成為珠光材料行業的關鍵發展趨勢。 公司自主掌握合成雲母製造核心專利,是目前全球唯一覆蓋高中端市場包括高性能合成雲母基材、片狀氧化鋁基材、珠光鱗片基材和二氧化矽基材珠光材料全品類產業化的企業,解決天然雲母資源枯竭與高端雲母依賴進口的「卡脖子」難題。 2025年7月31日,環球新材國際旗下再添知名品牌,其以6.65億歐元完成收購德國默克集團表面解決方案業務部門(現更名為SUSONITY)。公司的主營業務線也從珠光材料延伸到了化妝品活性業務和高端工業功能性材料。 目前, 公司前10大客戶合作關係均超15年,包括汽車及化妝品領域等國際高端客戶,部分超過30年,品牌公信力深厚,確保穩定高端市場。環球新材國際旗下SUSONITY 德國、日本、美國生產基地與 CHESIR (中國)、CQV (南韓) 產能形成覆蓋全球的生產網絡。通過並購SUSONITY,公司獲得默克相關領域全球專利組合、技術配方庫及歐洲、日本、美國核心研發平台,全面打通高端表面材料的技術鏈,形成從基礎原材料到應用端創新的全鏈條研發、生產及商業化能力。未來,公司將進一步整合全球銷售網絡,拓展市場覆蓋面,豐富產品矩陣,優化全球供應鏈,提升研發實力。 SUSONITY積極推行負責任採購,對礦山和加工商進行定期和非定期審計,以確保供應鏈的最高透明度;同時優先考慮符合不斷變化的法規及符合公司價值觀的採購項目;積極參與促進可持續實踐、改進流程和協調行為的合作夥伴關係。作為負責任雲母倡議 (RMI) 的聯合創始人,公司支持在供應鏈中可持續地採購天然雲母,並遵守聯合國全球契約 (UNGC) 的十項原則,將其納入公司內部的良好行為和實踐指南。   錨定責任,駛向更廣闊的價值藍海 在企業的掌舵人蘇爾田博士看來,科技與產業深度融合的時代背景下,新材料正成為驅動全球可持續發展的核心力量。作為這一領域的先行者,環球新材國際始終致力於以創新材料科技賦能千行百業,助力構建一個更加綠色、智能、低碳的未來。 作為公司ESG戰略的總設計師,同時也是ESG理念最積極的踐行者和傳播者,蘇爾田博士親自領導並投入研發資源,推動低碳環保型珠光材料及合成雲母技術的突破,使公司產品始終站在行業綠色升級的前沿。 「以責任為錨,赴價值藍海」。對於環球新材國際而言,此次獲獎是里程碑,更是新起點。在蘇爾田博士的領導下,公司正積極引領全球新材料行業的轉型升級與價值鏈重塑,致力於為股東、員工、客戶及社會創造長期、共享的卓越價值,在高質量發展的浩瀚藍海中,破浪前行。 2025-12-30 此財經新聞稿由EQS via SeaPRwire.com轉載。本公告內容由發行人全權負責。瀏覽原文: http://www.todayir.com/tc/index.php

國泰君安國際助力臥安機器人成功登陸香港聯交所主板

香港, 2025年12月30日 - (亞太商訊 via SeaPRwire.com) - 國泰海通集團下屬公司國泰君安國際控股有限公司(「國泰君安國際」或「公司」,股份代號:1788.HK)作為聯席保薦人、整體協調人、聯席全球協調人、聯席帳簿管理人及聯席牽頭經辦人,成功助力臥安機器人(深圳)股份有限公司(「臥安機器人」,股份代號:6600.HK)于香港聯合交易所主板掛牌上市。本次臥安機器人全球發售最終定價每股H股73.80港元,全球發售共22,222,300股H股(其中香港發售2,222,300股H股,國際配售20,000,000股H股),綠鞋前集資規模約為16.4億港元,為公司發展注入關鍵資本動能。此次發售也獲得了境內外機構投資者的踴躍認購,香港公開發售認購倍數254.5倍,國際配售認購倍數8.9倍。公司成功引入了包括高瓴、Cithara、無極資本、中國東方、Yield Royal、觀博資本 及 銳智資本 作為基石投資者,基石投資占比全球發售約42.68%,有效鞏固公司的資本基礎與市場信用,支持其在研發投入、產品矩陣擴張及海外渠道深化等關鍵領域進行持續的中長期投入。在此項目中,國泰君安國際充分發揮集團境內外一體化平台優勢,憑藉貫穿全程的專業服務與高效執行,為臥安機器人提供了全方位的資本市場支援,展現了其在服務前沿科技企業方面的深厚實力。國泰君安國際在本專案中提供了涵蓋全流程的精准服務:在方案設計階段,緊密結合資本市場窗口與公司發展需求,完善發行方案與關鍵路徑,有效提升專案推進效率;在執行過程中,高效統籌公司、監管機構及仲介團隊,確保各關鍵節點高品質落地;在價值傳遞環節,圍繞公司構建智能家庭機器人產品生態系統的核心邏輯,精心組織投資者溝通,強化市場理解與預期管理;在發行定價階段,依託覆蓋廣泛的國際投資者網路與強大的分銷能力,有力支援訂單結構優化與定價效率提升。繼人形機器人領域代表性專案優必選科技(股份代號:9880.HK)及協作機器人領域代表性專案越疆(股份代號:2432.HK)之後,臥安機器人(股份代號:6600.HK)的成功上市,標誌著國泰君安國際在具身智能及機器人產業鏈的資本市場服務中,已建立覆蓋「價值梳理—合規推進—全球路演—簿記定價—配售交割」的系統化執行能力,並形成從上市前融資到國際投資者觸達的一體化投行服務閉環。未來,國泰君安國際將繼續發揮跨境資本市場服務能力,助力更多中國科技企業借力香港國際金融中心,加速全球化佈局與高品質發展。關於臥安機器人臥安機器人成立于2015年。區別于傳統單體智能家居設備與普通家庭機器人,公司通過落地「家庭機器人系統」路徑,融合AI、機器人及物聯網技術,以決策智能中樞實現即時環境感知、多設備協作與邊緣智能處理,覆蓋智能操控、家務勞動、智慧管家、養老護理、安全防護及能源管理等多元家庭場景。作為全球家庭機器人系統行業的研發實踐者,公司擁有311項專利(其中56項發明專利),研發團隊占員工總數約43%。截至2025年12月11日,公司註冊用戶逾350萬,連接設備累計逾1,080萬台(約55.9%的註冊用戶連接兩款或以上產品)。產品銷往全球逾90個國家及地區,並在全球逾2,000間線下零售店可供購買。關于國泰君安國際國泰海通集團下屬公司國泰君安國際(股票代號:1788.HK),是中國證券公司國際化的先行者和引領者,公司是首家通過IPO于香港聯合交易所主板上市的中資證券公司。國泰君安國際以香港爲業務基地,幷在新加坡、越南和澳門設立子公司,業務覆蓋全球主要市場,爲客戶境外資産配置提供高品質、多元化的綜合性金融服務,核心業務包括財富管理、機構投資者服務、企業融資服務、投資管理等。目前,國泰君安國際已分別獲得穆迪和標準普爾授予「Baa2」及「BBB+」長期發行人評級,MSCI ESG「A」評級, Wind ESG「A」評級及商道融綠ESG「A」評級,同時其標普全球ESG評分領先全球84%同業。公司控股股東國泰海通證券(股票代號:601211.SH/2611.HK)爲中國資本市場長期、持續、全面領先的綜合金融服務商。更多關于國泰君安國際的資訊請見:https://www.gtjai.com Copyright 2025 亞太商訊 via SeaPRwire.com. All rights reserved. www.acnnewswire.com

USAS Building System Listed on the Hong Kong Stock Exchange: A Top-Three Industrial Prefabricated Steel Structure Solution Provider Enters a New Phase in the Capital Markets

HONG KONG, December 30, 2025 - (ACN Newswire via SeaPRwire.com) – On 30 December, USAS Building System (Shanghai) Co., Ltd. (the “Company” or “USAS”) was officially listed on the Main Board of The Stock Exchange of Hong Kong Limited, marking the completion of an important step in the Company’s entry into the international capital markets and the commencement of a new development phase as a publicly listed company accessible to public investors.The successful listing represents not only a key milestone in the development history of USAS, but also brings the industrial prefabricated steel structure segment—long serving the manufacturing sector—into clearer view of the capital markets through a more representative business profile.As a prefabricated steel structure building solution provider focused on the industrial sector, USAS addresses the construction needs of manufacturing plants and industrial projects by offering integrated subcontracting services covering design optimisation, procurement, manufacturing and on-site installation. According to the Frost & Sullivan Report, by revenue in 2024, the Company ranked third in China’s industrial prefabricated steel structure building market.A Stable Operating Scale Provides a Foundation After ListingFrom an operating perspective, USAS has established a relatively stable business scale. As disclosed in the prospectus, from 2022 to 2024, the Company recorded revenue of approximately RMB1,903 million, RMB1,453 million and RMB1,523 million, respectively, maintaining an overall scale at the level of over RMB1 billion. Among these, prefabricated steel structure building subcontracting services have consistently been the core source of revenue. In 2024, revenue from this business amounted to approximately RMB1,241 million, accounting for 81.5% of total revenue, demonstrating the Company’s high level of focus on its core industrial prefabricated steel structure business.Against the backdrop of pronounced project-based business characteristics, the Company’s profitability structure has also remained relatively stable. From 2022 to 2024, USAS recorded overall gross profit margins of 12.7%, 14.8% and 12.5%, respectively, while the gross profit margin of the core subcontracting business remained within the 13%–15% range over the long term, reflecting a relatively mature operating system in project management, cost control and delivery capability. At the same time, the prospectus shows that the Company’s operating cash flow performance has remained stable, with sound liquidity, providing the necessary financial support for the continued advancement of its business and the execution of projects.Clear Long-Term Logic for Industrial Buildings, with Overseas Business as an Incremental SupplementFrom an industry perspective, industrial prefabricated steel structure buildings primarily serve manufacturing plants and industrial projects, and their demand is highly correlated with the manufacturing investment cycle. As manufacturing develops toward higher-end, larger-scale and more intensive operations, industrial projects increasingly require higher construction efficiency, structural safety and system integration capabilities, giving prefabricated steel structures a clear industrial rationale for application in industrial buildings.While continuing to deepen its presence in the domestic industrial market, USAS has also gradually expanded its related overseas business. The prospectus discloses that revenue from the Company’s industrial environmental equipment business is mainly derived from overseas markets. Revenue from this segment increased from approximately RMB31.82 million in 2022 to approximately RMB100 million in 2024, with the gross profit margin rising to 18.9% over the same period. The relevant business has covered multiple overseas markets and has obtained certifications in China, the United States, Europe and Canada, laying a foundation for the Company’s cross-regional project execution and overseas expansion.Using the Hong Kong Listing as a New Starting Point to Advance Long-Term Industrial Building DeploymentFollowing the completion of its listing on the Hong Kong Stock Exchange, USAS has formally entered the public capital market system. In line with the development directions disclosed in the prospectus, the Company will continue to deepen its presence in the industrial building sector in the future. While consolidating its core prefabricated steel structure business, the Company will promote synergies among different business segments and steadily advance its overseas market expansion.Against the backdrop of manufacturing investment cycles, industrial building upgrades and the gradual release of overseas demand, USAS has built a verifiable business foundation through years of project accumulation, a stable revenue scale and a gradually taking-shape overseas footprint. With the listing platform now in place, the Company’s operational capabilities and development path in the industrial prefabricated steel structure segment are expected to continue advancing under conditions of higher transparency and broader market participation. Copyright 2025 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

美聯股份港交所掛牌上市:行業前三的工業預製鋼結構解決方案提供商 開啟資本市場新階段

香港, 2025年12月30日 - (亞太商訊 via SeaPRwire.com) - 2025年12月30日,美聯鋼結構建築系統(上海)股份有限公司(以下簡稱「美聯股份」)正式在香港交易所主板掛牌上市,標誌著公司完成登陸國際資本市場的重要一步,並由此開啟面向公眾投資者的全新發展階段。此次成功上市,不僅是美聯股份發展歷程中的關鍵節點,也使工業預製鋼結構這一長期服務製造業的細分領域,首次以更為清晰的業務樣本進入資本市場視野。作為一家聚焦工業領域的預製鋼結構建築解決方案提供商,美聯股份圍繞製造業廠房及工業項目建設需求,提供涵蓋設計優化、採購、製造及現場安裝在內的一體化分包服務。根據弗若斯特沙利文報告,按 2024 年收入計,公司在中國工業預製鋼結構建築市場中排名第三。穩定的經營規模,構成上市後的基本盤從經營表現看,美聯股份已形成相對穩定的業務規模。招股書披露,2022 年至 2024 年,公司收入分別約為 19.03 億元、14.53 億元及 15.23 億元人民幣,整體維持在十多億元水平。其中,預製鋼結構建築分包服務始終為核心收入來源,2024 年該業務實現收入約 12.41 億元人民幣,佔總收入的 81.5%,顯示出公司對工業預製鋼結構主業的高度聚焦。在項目型業務特徵較為突出的背景下,公司盈利結構亦保持相對穩定。2022 年至 2024 年,美聯股份整體毛利率分別為 12.7%、14.8% 及 12.5%,核心分包業務毛利率長期維持在 13%–15% 區間,反映出公司在項目管理、成本控制及交付能力方面已形成較為成熟的運營體系。與此同時,招股書顯示,公司經營活動現金流表現穩健,流動性狀況良好,為業務持續推進和項目執行提供了必要的資金支撐。工業建築長期邏輯清晰,海外業務成為增量補充從行業層面看,工業預製鋼結構建築主要服務於製造業廠房及工業項目,其需求與製造業投資周期高度相關。隨著製造業向高端化、規模化及集約化方向演進,工業項目對建設效率、結構安全性及系統集成能力的要求不斷提高,預製鋼結構在工業建築中的應用具備較為明確的產業邏輯。在深耕國內工業市場的同時,美聯股份亦逐步拓展海外相關業務。招股書披露,公司工業環保裝備業務的收入主要來自海外市場,該板塊收入由 2022 年的約 3,182 萬元人民幣增長至 2024 年的約 1 億元人民幣,同期毛利率提升至 18.9%。相關業務已覆蓋多個海外市場,並取得中、美、歐及加拿大等地認證,為公司跨區域項目執行及海外拓展奠定基礎。以港股上市為新起點,推進工業建築長期佈局完成在港交所的掛牌上市後,美聯股份正式進入公眾資本市場體系。結合招股書披露的發展方向,公司未來將繼續圍繞工業建築領域深化佈局,在鞏固工業預製鋼結構核心業務的同時,推動不同業務板塊之間的協同,並穩步推進海外市場拓展。在製造業投資周期、工業建築升級及海外需求逐步釋放的背景下,美聯股份以多年項目積累、穩定的收入規模及逐步成型的海外佈局,構建起可驗證的業務基礎。隨著上市平台的搭建完成,公司在工業預製鋼結構這一細分領域的經營能力與發展路徑,將在更高透明度和更廣泛市場參與下持續推進。 Copyright 2025 亞太商訊 via SeaPRwire.com. All rights reserved. www.acnnewswire.com